How to Fix Error 5B00 Printer Canon iP2770

The printer is a tool used to print the document. This is very vital tool for us that day - the day is required to work with documents quickly. The printer has a problem that sometimes we do not expect, whether it was not able to print or connection of a computer is not readable by the printer or otherwise. in fact many indications that we can see when the printer is in error, for example through blinking indicator lights flickering in a certain amount.

This problem is common in almost all types and brands of printers, such as Canon, Epson, HP, etc. because basically every printer has the same age as the usability of the LCD. and any of their respective parties - one would anticipate this if the printer has an error or corrupted by providing software resetter.

Problems Error in Printer Canon iP2770 often happens, however this time Printer Canon iP2770 Error 5B00 experience and should be done in order to reset the printer Canon iP2770 printer can be reused.

Guide How to Fix (Reset) Canon iP2770 Error 5B00

Previous buddy should already have resetter Canon iP2770. If you have not had a try Download Resetter Canon iP2770 v1074 are widely spread on the Internet or a friend can download it here for free. To reset the Canon iP2770 printer, the printer must be in a state of service mode beforehand, how:

* Plug Printer with electricity (but not turned on)

* Press the RESUME button for two seconds

* While pressing the Resume button, you press the POWER button until the indicator light turns green

* Then you loose the Resume button (POWER button remains in a state in press)

* And you press the Resume button 5 times (remember 5 times, tap-off tap off the press)

* And then release both buttons simultaneously RESUME and POWER

* Indicator light will blink and light up green

* Usually the computer will detect the new device, but you can ignore it

Then we reset disposable stay reseter that have downloaded earlier. The next step you extract the files resetter that had been downloaded. and then run the program resetter.

Do not forget to prepare a few pieces of paper for the printer can be reset.

1. Press the PLAY button like in the picture above and then the printer will print with the result "D = 000.0"

2. then press the Clear EEPROM as the second step in the image. then return the printer will print with mixed results, but note, will have the words "TPage (TTL = 00000)" This indicates that the Canon iP2770 printer has been successfully reset.

Now turn the printer off and back on. test by performing print some documents, canon printer you should now be able to operate as usual.